Work we’ve done
Below is a selection of work we’ve done in the area of laser cutting. Please Click on a picture to enlarge and what materials was used woods rubbers card.
These are customer products we have made for them.
-
Laser Cut 3mm Birch ply wood
Click anywhere to close
-
laser Engraved walnut and beach in 2mm 4mm and 9mm almost any wood
Click anywhere to close
-
Laser Cut Green Fabric Felt
Click anywhere to close
-
3mm Neoprene rubber/foam can also be adhesive backed and cut in one operation
Click anywhere to close
-
2mm laser Cut & Engraved Leather we also cut 3mm leather and alcantara
Click anywhere to close
-
1.5mm sliver on black rowmark we laser engrave though the silver down to the black then laser cut
Click anywhere to close
-
laser cut and engraved card just every day card we can also cut corrugated card
Click anywhere to close
-
laser cut Latters of sizes up to 1300mm x 900mm in in MDF from 2mm up to 12mm
Click anywhere to close
-
6mm oak veneered MDF
Click anywhere to close
-
3mm neoprene rubber/foam cut with adhesive back in one operation with no melting or burning
Click anywhere to close
-
laser cut 9mm MDF
Click anywhere to close
-
laser cut 3mm ABS
Click anywhere to close
-
laser cut 3mm Nylon 6 we cut abs and nylon 6.6
Click anywhere to close
-
polo laser cut 5mm Clear Acrylic and engraved we also engraved the carpert
Click anywhere to close
-
laser cut 2mm and 3.2mm corrugated cardboard 2mm cardboard is almost 100% recycled
Click anywhere to close
-
laser cut 5mm black and white acrylic very high cut tolerance 0.2 mm so black would fit nice and tight in side white
Click anywhere to close
-
3mm cork lattices work we all so use cork for gasket Note decorative cork and gasket cork are not the same
Click anywhere to close
-
3mm MDF one is normal MDF and one Medite MDF
Click anywhere to close
-
5mm clear perspex cut at 1mm thick the white on the top is the protective coating still intact
Click anywhere to close
-
laser cut 3mm mirror acrylic
Click anywhere to close
-
laser cut tufnol 3mm and 0.9
Click anywhere to close
-
washers in 3mm birch Plywood 3mm extruded acrylic 3mm foam
Click anywhere to close
-
laser cut and engraved walnut veneered
Click anywhere to close
-
laser cut 3mm birch ply with heart to laser engrave names on to
Click anywhere to close
-
Tudor black oak stained onto 4mm birch ply then engraved to bring the light colour of the birch back
Click anywhere to close
-
laser engraved Slate
Click anywhere to close
-
Laser cut and Engraved etched stained birch ply wood
Click anywhere to close
-
laser cut 12mm birch ply wood
Click anywhere to close
-
Triple and multi walled cardboard cut be laser cut with no burning
Click anywhere to close
-
laser cut plastic tops
Click anywhere to close
-
Click anywhere to close
-
Click anywhere to close
-
Click anywhere to close
-
6mm oak veneered MDF
Click anywhere to close
Below is a selection of work we’ve done in the area of laser cutting. Please Click on a picture to enlarge and what materials was used woods rubbers card.
These are customer products we have made for them.
-
Laser Cut 3mm Birch ply wood
Click anywhere to close
-
laser Engraved walnut and beach in 2mm 4mm and 9mm almost any wood
Click anywhere to close
-
Laser Cut Green Fabric Felt
Click anywhere to close
-
3mm Neoprene rubber/foam can also be adhesive backed and cut in one operation
Click anywhere to close
-
2mm laser Cut & Engraved Leather we also cut 3mm leather and alcantara
Click anywhere to close
-
1.5mm sliver on black rowmark we laser engrave though the silver down to the black then laser cut
Click anywhere to close
-
laser cut and engraved card just every day card we can also cut corrugated card
Click anywhere to close
-
laser cut Latters of sizes up to 1300mm x 900mm in in MDF from 2mm up to 12mm
Click anywhere to close
-
6mm oak veneered MDF
Click anywhere to close
-
3mm neoprene rubber/foam cut with adhesive back in one operation with no melting or burning
Click anywhere to close
-
laser cut 9mm MDF
Click anywhere to close
-
laser cut 3mm ABS
Click anywhere to close
-
laser cut 3mm Nylon 6 we cut abs and nylon 6.6
Click anywhere to close
-
polo laser cut 5mm Clear Acrylic and engraved we also engraved the carpert
Click anywhere to close
-
laser cut 2mm and 3.2mm corrugated cardboard 2mm cardboard is almost 100% recycled
Click anywhere to close
-
laser cut 5mm black and white acrylic very high cut tolerance 0.2 mm so black would fit nice and tight in side white
Click anywhere to close
-
3mm cork lattices work we all so use cork for gasket Note decorative cork and gasket cork are not the same
Click anywhere to close
-
3mm MDF one is normal MDF and one Medite MDF
Click anywhere to close
-
5mm clear perspex cut at 1mm thick the white on the top is the protective coating still intact
Click anywhere to close
-
laser cut 3mm mirror acrylic
Click anywhere to close
-
laser cut tufnol 3mm and 0.9
Click anywhere to close
-
washers in 3mm birch Plywood 3mm extruded acrylic 3mm foam
Click anywhere to close
-
laser cut and engraved walnut veneered
Click anywhere to close
-
laser cut 3mm birch ply with heart to laser engrave names on to
Click anywhere to close
-
Tudor black oak stained onto 4mm birch ply then engraved to bring the light colour of the birch back
Click anywhere to close
-
laser engraved Slate
Click anywhere to close
-
Laser cut and Engraved etched stained birch ply wood
Click anywhere to close
-
laser cut 12mm birch ply wood
Click anywhere to close
-
Triple and multi walled cardboard cut be laser cut with no burning
Click anywhere to close
-
laser cut plastic tops
Click anywhere to close
-
Click anywhere to close
-
Click anywhere to close
-
Click anywhere to close
-
6mm oak veneered MDF
Click anywhere to close